How Much Does a Laundry Room Cabinet Installation Cost? (2026 Price Guide)

A laundry room cabinet system costs $1,500 to $5,000 for a professionally designed and installed build in 2026. Laundry room remodel cost, which includes structural work, new plumbing, electrical upgrades, and appliances, runs significantly higher at $6,000 to $17,000 on average and is a separate project scope. The final cabinet system price depends on 4 variables: room size, cabinet configuration, material finish, and add-ons. Small laundry renovation projects focusing on cabinet storage and a folding counter typically fall between $1,500 and $2,500, while full builds with pull-out hampers, ironing boards, and full-height cabinetry reach $4,000 to $5,000. Laundry room cabinets sit at the lower end of the custom storage range, and homeowners comparing custom closet cost across project types find laundry systems one of the most accessible entry points into professional organization. Custom closet ROI data suggests laundry room upgrades can support resale appeal in markets where buyers value functional utility spaces.

Laundry room cabinet cost and laundry room remodel cost refer to 2 different project scopes, and combining them in a single budget without distinguishing them often leads to underestimating both. A laundry room cabinet system covers the built-in components installed inside an existing space: upper cabinets, lower cabinets, a folding counter, and pull-out storage accessories. This is what a custom storage company designs and installs, and it is the focus of this guide.

A laundry room remodel involves structural changes: new plumbing, electrical circuits, appliance installation, flooring, and drywall. A full laundry room remodel costs $6,000 to $17,000 on average nationally, with comprehensive renovations including appliances reaching $42,000. A cosmetic refresh covering new flooring, shelving, and paint starts around $1,800. These structural and appliance costs sit entirely outside the cabinet system budget and require a licensed general contractor. Completing structural or appliance work first gives a custom storage designer accurate final dimensions to work from, which produces a better-fitting cabinet system at a lower total cost.

A custom laundry room cabinet system costs $1,500 to $5,000 for a professionally installed build. Custom laundry room configurations range from a basic upper cabinet run above the machines to full builds with lower base cabinets, a folding counter across the full wall, and pull-out specialty storage. The table below shows typical installed price ranges by system type.

These figures include design, TFL cabinetry, hardware, and professional installation. They exclude appliances, plumbing, electrical work, and flooring. Larger multi-wall laundry rooms with premium countertops, utility sink cabinetry, and tall storage units can exceed $5,000. Most laundry room cabinet builds in North Atlanta fall between $2,000 and $4,000, with the 3 biggest cost variables being whether a folding counter spans the full wall, how many pull-out hamper drawers are included, and whether lower base cabinets run beneath the machines. Cabinet configuration drives the largest share of the budget within any given room footprint. 

Laundry room cabinet cost is driven by 4 factors: room size, cabinet configuration, material finish, and add-ons. Homeowners comparing custom closet cost across storage project types find that these same 4 factors apply to every build, with laundry room systems typically sitting at the lower end of the range due to smaller footprints and simpler configurations than walk-in or garage builds.

Room size determines how many linear feet of cabinetry the room accommodates. A small laundry closet or stacked-unit room with 36 to 48 inches (91 to 122 cm) of usable wall runs significantly less than a dedicated laundry room with 8 to 12 feet (244 to 366 cm) of wall space. Every additional cabinet section adds material and installation cost.

Cabinet configuration is where the largest cost variation occurs. Upper cabinets alone are the most affordable option. Adding lower base cabinets beneath the machines raises the base by $400 to $800. A full-width folding counter spanning the machines and lower cabinets adds another $300 to $700 depending on counter depth and material.

Material finish follows the same TFL cost logic as all custom storage projects. White or off-white TFL panels are the most cost-effective. Wood grain or textured TFL finishes add $200 to $500 to a standard laundry room build. The most common budget surprise in laundry room cabinet projects is counter material selection. Laminate counters stay near the lower end of the range, while quartz, solid-surface, or stone tops add several hundred to several thousand dollars depending on run length and fabrication. This cost multiplies across every linear foot of counter, which makes material choice the most consequential single decision in a full-wall laundry cabinet build.

Add-ons layer specialty features onto the base system and account for the remaining share of the budget. 

The next section covers each add-on individually.

Add-ons raise the final laundry room cabinet cost by $100 to $800 per item, with pull-out hampers and ironing boards having the largest individual impact. The 6 most common laundry room add-ons and their 2026 price ranges are listed below.

For homeowners who regularly iron or steam clothing, a pull-out ironing board is often one of the most useful add-ons because it adds a dedicated work surface without taking up floor space. In North Atlanta laundry rooms with 6 to 8 feet (183 to 244 cm) of wall space, a pull-out ironing board paired with a hanging rod section represents the configuration that most consistently improves daily workflow without consuming counter space. Add-ons compound in daily function, which makes the total laundry room cabinet investment worth evaluating against long-term convenience and resale return.

A custom laundry room cabinet system is worth the investment for most homeowners because it delivers value on 2 levels: daily efficiency and resale appeal. A well-planned system eliminates countertop clutter, floor-level sorting, and wasted wall space that make most builder-grade laundry rooms inefficient to use.

Laundry room cabinet upgrades can support resale appeal by improving buyer perception of a home's utility space quality. A well-organized laundry room with built-in cabinets, a folding counter, and pull-out storage signals a home that has been maintained thoughtfully. Homeowners evaluating custom closet ROI across project types find that laundry room systems deliver strong functional value relative to their cost, which can translate to positive buyer perception at resale. 

Small laundry renovation cost runs $800 to $2,500 for a professionally installed cabinet system in a compact space. A stacked washer and dryer configuration frees the wall beside the machines for a narrow upper cabinet run and a small counter at a total cost of $1,000 to $1,800. A side-by-side configuration with machines against one wall allows upper cabinets above the machines and a base cabinet run on an adjacent wall at $1,500 to $2,500. Small laundry renovations can deliver strong functional value relative to their cost because every added cabinet or work surface has an immediate impact in a compact, frequently used room.

A standard laundry room cabinet installation takes 4 to 8 hours and is typically completed in a single visit. Larger builds with full-height cabinetry across multiple walls take 1 to 2 days. Most custom storage studios complete design, manufacturing, and scheduling within 1 to 3 weeks of design approval. The installation timeline is similar to a reach-in closet build, making laundry room cabinet projects one of the faster turnaround options in custom storage.

The most cost-effective laundry room cabinet configuration is an upper cabinet run above the machines paired with a standard-depth folding counter, which costs $1,200 to $2,000 installed. This configuration uses the wall space above the machines that most builder-grade laundry rooms leave empty, adds organized closed storage for detergent, stain removers, and supplies, and provides a dedicated folding surface that keeps finished laundry off the floor. A pull-out hamper drawer beneath the counter adds $150 to $400 and converts the cabinet run into a complete sorting and storage system for the cost of a single add-on.

Laundry room cabinet cost becomes clear once you have accurate wall measurements, a count of the linear feet available above and beside the machines, and a sense of whether a folding counter, pull-out hamper, or ironing board are priorities. A free in-home consultation gives you a precise number for your specific room.

CWA Closets and Cabinets designs and installs custom laundry room cabinets across Norcross, Alpharetta, Johns Creek, Milton, Sandy Springs, Duluth, and Cumming. Every project combines quality craftsmanship, premium TFL cabinetry, and precise installation to deliver a result that holds up daily. Contact us to get an accurate quote for your laundry room project.